Fingertec FTDP (FingerTec Data Processor) Manuel d'utilisateur télécharger pdf (Page 5)

Connection by serial port: RS232/RS485

Click on the Comm check box if you are connecting to a terminal via the RS232 or RS485 wires.

Connection by URL

You can click on URL if you are connecting to the terminal via the Internet.

3 • TERMINAL MANAGEMENT

To enter the terminal management page, click on Terminal. You can add, edit, and delete

terminals from this page.

Adding FingerTec Terminals

VIA TCP/IP CONNECTION

To Add: Click Add > Insert the terminal’s IP address > Check that “Port No.” value is 4370

> Check that “COMM Key” value is 0 > Assign a name to the terminal > Click Connect to

start connection.

VIA RS232/RS485 CONNECTION

To Add: Define the Comm Port > Define the Baud Rate > Check that “COMM Key” value

is 0 > Assign a name to the terminal > Click Connect to start connection.

1 2 3 4 5 6 7 8 9 10 ... 17 18

Pas de commentaire

Fingertec FTDP (FingerTec Data Processor) Manuel d'utilisateur Page 5